The F15-185 Step Nosing is designed to ensure visibility of steps in escape routes to meet NZBC Clause F6 “Visibility in Escape Routes”. The Step Nosing will be effective in all light conditions SUPPLY The product is available in 100mm increments from 800mm to 1500mm to comply with IBC recommendations to mark the escape path on the front edge of the step to within 50mm of the wall or the side of the step. Custom lengths can also be cut on site from 2.45 metre and 3.06 metre lengths. COMPOSITION The F15-185 Step Nosing profile consists of 6060T5 aluminium extrusion, anodized (natural/silver colour) to 20 microns thickness. Ecoglo E14-085 Step Edge Contrast is adhesively fixed into the extrusion. The high visibility E14-085 is manufactured from extruded 6063T5 aluminium section. Silicon Carbide anti-slip materials and custom made photoluminescent pigment are embedded in thermoset polyester carriers to integrally bond the active ingredients into the aluminium following cur-ing at high temperature. The photoluminescent area is also recessed into protective channels. INSTALLATION The F15-185 Step Nosing can be used on a range of substrates including concrete, timber, tiles, vinyl, steel and checker plate. Uni clamp assemblies can be used for installation onto steel mesh steps. Installation is a two step process using fixers (supplied) and polyurethane adhesive. The nosing profile is pre-drilled in the recess. Once the insert is adhered into the recess the fixers are hidden. Maximum recommended length for outdoor installation is 1500mm. Installation needs to be carried out strictly in accordance with the Ecoglo installation instructions. Consult Installation Instructions on website for full details and surface preparation.including during failure of the main lighting. If you require assistance with your selection please contact us either by email or phone. |