Dormakaba PHA210 3 Point Locking Double Door Panic Bolt (NON FIRE RATED) The DORMA PHA 2000 Series (PHA 210x Modular Combination) 3-point locking double door panic bolt set provides rapid, code-compliant emergency egress alongside high mechanical security for non-fire-rated rebated or non-rebated double doors. Designed for commercial, educational, and public buildings, this modular surface-mounted push-bar hardware integrates a single horizontal latch on the active leaf with vertical top and bottom Pullman latches on the inactive leaf (or three-point vertical/lateral rod configurations), ensuring a secure seal across both door leaves until activated. Key Features3-Point Perimeter Security: Distributes latching across three distinct points (top, bottom, and central latch), preventing door warpage and offering substantial resistance against forced entry while maintaining immediate one-touch exit. Full EN 1125 Compliance: Certified for emergency escape doors where occupants may have no prior familiarity with the exit hardware, operating reliably under minimal operational pressure. Universal Handing: Non-handed components accommodate both left-hand and right-hand door leaves without internal modification. Standard (Non-Fire) Application: Tailored with zinc/die-cast latch mechanisms and standard nylon strike boxes intended strictly for non-fire-rated perimeter exit routes and utility access doors. Concealed Fastenings: Clean architectural visual with surface-mounted rod covers and fully concealed mounting screws to discourage tampering. External Access Integration: Compatible with DORMA PHT exterior trims (lever handle or knob escutcheons with Euro-profile key cylinders) for controlled outside access.
Technical Specifications| Parameter | Specification | | Series | DORMA PHA 2000 (Modular Panic Hardware) | | Application | Double leaf doors (rebated or plain meeting stiles) | | Fire Rating | Non-Fire Rated (Standard zinc/die-cast bolt heads) | | Standard Door Height | Up to 2,270 mm (extensions available up to 3,400 mm) | | Standard Door Width | Up to 1,000 mm / 1,300 mm (field-cuttable crossbars) | | Maximum Door Weight | Up to 200 kg per leaf | | Certification | BS EN 1125 (Class 3 7 6 B 1 3 2 2 A A) | | Standard Finishes | Silver lacquer (P600), Satin Stainless Steel look (F1), or custom RAL |
Looking for external access? This device can be easily paired with a dormakaba PHT External Lever Trim to manage secure, keyed entry from the outside without affecting emergency egress
If you require assistance with your selection please contact us either by email or phone.
|